Scant hours after the SDV tuning, DRM-relaxing firmware update for Vista and Windows 7 Digital Cable Tuner users became available, Missing Remote let us know Microsoft has come through on the other half of its CEDIA promise by pushing the Digital Cable Advisor to Media Center Extras galleries everywhere. This half should enable all Windows 7 PCs to work with the CableCard tuners, sans-OEM requirement or inconvenient hacking. Sure we could ask for more from Windows 7 Media Center, but for now Netflix and these two (in less than 100 days) will have to do.

Read - MCE: Digital Cable Advisor Tool Available Now!
Read - ATI DCT Firmware update pops up on Windows Update, DRM-free MCE recordings & are a go

Microsoft delivered the first half of two promised ATI Digital Cable Tuner-related updates as the 1.19.12.09050155 firmware update is now available from Windows Update (listed with the optional udates) that will relax the way it handles DRM on its recordings and add support for Switched Digital Video. With the new update applied, all Copy Freely-marked programing will be recorded without DRM allowing you to move it between PCs, convert it to another format or whatever you wish with ease, however as our hands on experience with the new firmware indicated you'll still need your cable provider to pass along the right bits to make it all operate properly. Still waiting in the wings is the Advisor Utility that will allow Digital Cable Tuners to work with any PC, no OEM purchase or hacking skills required.

[Thanks, Rob]

Skipping commercials on a HTPC DVR has been around for a long long time, but it isn't always the easiest thing to setup. And even if you do get it working, there are so many options, it can take some time before you get it working the way you want it. So in the spirt of Windows 7 day, and the fact that the next major version of ShowAnalyzer is being released, we figured we'd write up a how to with a few tips and tricks of our own. We start by downloading and installing the main components; DVRMSToolBox, the DTB Media Center Add-in and ShowAnalyzer, and finish off with some troubleshooting for when things go wrong. So if you use Media Center, click through and never pick up the remote to skip a commercial again.

Ever since CEDIA Windows Media Center enthusiasts have been anxiously awaiting the announced firmware update for the ATI Digital Cable Tuner and the Advisor Utility. While the firmware will finally relax the DRM on recording made with the Digital Cable Tuner and enable support for Tuning Adapters, the Advisor Utility will make it so anyone can add a Digital Cable to Tuner to their Windows 7 PC. Although a hard release date was never announced for either of these, it was fully expected that both would be available at the same time as Windows 7. Now Microsoft has posted over at The Green Button letting us know that we can stop checking as neither will be released today. To add insult to injury no new date was given, only that it would be available as soon as possible. So yeah, big time bummer for Media Center fans.

With the main obstacles for adoption of CableCARD tuners in Home Theater PCs gone it just makes sense that even those who don't use Windows Media Center would want to get in on the fun. If only it was that simple, with CableLabs holding the keys to the kingdom, not just anyone can build software that will work with a CableCARD tuner and expect it to work. Good news for Sage TV fans, as the genius who came up with our favorite Media Center plugin (DVRMSToolBox) has now come up with a nifty work around. SageMCTuner is still in beta, but the idea is to put Media Center to work for Sage. So in other words, Media Center is still doing all the recordings etc, but Sage is calling all the shots and reaping all the benefits. If you want the full details you'll have to click through and try it yourself, go ahead, we'll be waiting for your return to hear how it worked out -- we bet it goes pretty well.

Now before you ask, the reason this post is so late has nothing to do with how off the mark we were with our predictions. It's just that we've been sick with the Flu around here and just now started to feel better -- guess all those long days on the show floor and late nights with the GT ACM are bad for the immune system. At any rate here is the wrap up of our Windows Media Center predictions as well as our overall impressions about Windows Media Center now that CEDIA is over.

If you have a ATI Digital Cable Tuner connected to your Windows Media Center then you've been waiting a long time for a firmware update. In fact, although updates were released fairly steadily during the first year of the product's life, the last update (1.17.1) was dated April 30th 2008. But this long delay has been particularly painful because this is the first update since CableLabs relaxed the DRM requirements last Summer -- it's also the very same update Microsoft has been touting since CEDIA 2008. So what took so long? We'd like to know, but one thing is for sure, CableLabs sure took its time in the approval process as the date on the firmware is May 1st 2009! Better late then never, so while you wait for the public release click through to find out what all the fuss is about.

We told you we were able to get a video of the Dish Network tuner for Windows Media Center in action and here it is. You can see that for the most part, the Dish content plays back just like any other HD source. We did seem to think that the channel changes were slower than we were used to, but not bad enough to be a deal breaker. The short clip is after the jump.

No the Windows 7 version of the Netflix Watch Instantly still isn't going to work on Extenders for Media Center, but it will include a more seamless experience than the Vista version does, like the movie info image above. Microsoft really wasn't ready to share any more details with us, but we suspect the search is improved. The fact that they were so tight lipped leads us to believe that Microsoft is still holding back on some Windows 7 details -- at least in regards to internet content and Windows 7. At this point it appears we might have to wait until the official release of Windows 7 to truly figure out if all that work to bring internet content to Windows 7 pays off.

We have good and bad news after visiting the Dish Network booth first thing in the morning. We're happy to say that Dish was proudly displaying a Dish Tuner for Media Center 7 at its booth. The bad news however is that it was just a "proof of concept." Which means no matter how hard we tried, no one would tell us anything about price or availability. The other thing up in the air was if the actual implementation would be based on VIP211K HD STBs like the demo, or if instead there would be a dedicated tuner. The last unknown was around VOD or PPV, which we know was recently being tested, but still no word if it'll make the final version. The other bad, but not unexpected news, is the fact that like the first generation CableCARD tuner for Media Center, all the content is copy protected. As for how it works, looks good, but the channel changing was slower than our CableCARD tuner enabled Media Center. We did grab a video, but you'll have to wait until we can get it uploaded.

While we knew that ATI Digital Cable Tuners were UPnP network tuners at heart, we've never heard of anyone actually using them across a network. But with the apparent imminent death of the 3rd party extender, OEMs are forced to find their own solution. For S1Digital that solution is a custom media server that fits into its Digital Entertainment Platform. The server starts at $3500, and in addition to all of the other media serving capabilities, it can have four or eight (license dependent) tuners connected to it and offer those tuner up to Windows Media Center PCs connected on the network. Each tuner has to be married to a specific PC, but this does give you the ability to watch live TV in the kitchen with only one cat5 drop running back to the server. So while this isn't exactly our the Windows Home Server and Media Center mashup we dream of, it certainly is a step in the right direction.

We had a good feeling that Microsoft might have a thing or two to announce around Windows 7 Media Center at the upcoming CEDIA show in Atlanta this September, but now we can start the official countdown. The after-hours event at ESPN Zone will help kick off the show in Atlanta at 6:30pm -- the event is invite only, but don't worry, we'll be bringing you the events live as they happen. Although the specific announcements are anyone's guess, the invite did let us know that all of the Windows Media Center news and updates will break there, as well as the winner of the Ultimate Install Contest. So that's just over two weeks until all your home media hopes will be fulfilled -- or destroyed -- depending on your perspective.

You read that right, there is no official announcement, but we've received a number of tipst letting us know that Microsoft and DISH have pulled the plug on the DISH Network Tuner for Windows 7 Media Center. We could care less about one of our predictions being wrong, but we are deflated about the fact that all the testers say they were shocked to get the news as we are because the beta seemed to have been going so well. No word on if the entire partnership is dead or just this iteration of the tuner, but the bottom line is everyone who contacted us doesn't believe we'll see a HD tuner for DISH Network for Media Center any time soon. Sorry to get your hopes up.

In what is hopefully one of many new announcements about Windows 7 leading up to its launch, Microsoft has added support for Dolby Digital Plus in most versions of Windows 7. This is good news indeed, as the Plus version of Dolby Digital not only supports higher bit rates than the classic Dolby Digital, but it also offers better sound quality than its older brother at the same bit rate -- it is not lossless like Dolby TrueHD though. The other key reason why this is essential to Windows 7 from the Media Center perspective is because premium content providers around the world use it (like France, Italy, Spain, Sweden, and the United Kingdom). Dolby also confirmed that this support includes Extenders for Media Center which makes it all the more useful.

With the launch of the Zune HD and the CEDIA show just around the corner, we've been hoping this could mean an all new integrated future for Windows Media Center and other Microsoft platforms -- until now. As a few commenters pointed out yesterday, the corrected spec sheet received from Microsoft indicated HDTV and protected Windows Media Center DVR-MS (the files used by Vista Media center) recordings were not supported. We reached out for clarification and received the following:

"Zune HD, and the forthcoming Zune 4.0 PC software, will support and transcode Windows Media Center recorded TV file formats from Windows Vista or Windows 7 that contain MPEG-2 video, in either the DVR-MS or WTV formats. Support is limited to unencrypted SD and HD recordings. HD Files with AC3 audio are not supported by Zune."

As you may or may not be aware, at least in the U.S. , and most other countries, any high definition broadcasts you snag from antenna, ClearQAM or otherwise use Dolby Digital AC-3 audio, meaning the Zune software won't be able to convert them. Current workarounds for bringing Media Center recordings on the go should still be a go, but all we can see is the missed opportunity to tie the two platforms together with easy one click transcoding support. Hopefully Microsoft still has something up its sleeve to pull together Zune and Windows 7 Media Center, but portable DVR recordings ain't it.