Slowly, ever so slowly we're beginning to learn about the internal differences between Sony's new PS3 Slim and its chubby ancestry. We already knew that it supported BraviaLink while talk of "faster gaming" was introduced (suspiciously) yesterday; something that remains very much in doubt until we can confirm. Now we hear that the fatboy gone slim supports Dolby TrueHD and DTS-HD Master Audio bitstream output to your receiver. Hear that audio nerds? Bitstream. See the HDMI chip on previous generations of the PS3 didn't support bitstream output of the new(ish) high def codecs like Dolby TrueHD and DTS-HD MA. As such, the PS3 had to decode it internally before sending it over to your receiver via LPCM. A process that could garble the lossless audio depending on your setup. Even though the vast majority of people will never notice the difference (or even care), PS3 Slim owners can still kick back in smug satisfaction each time the TrueHD or DTS-HD MA indicators light-up on their receivers.

We questioned the strategy of Marantz delivering a nearly $800 Bonus View Blu-ray player last fall, but it appears ready to settle things with customers who believe in its superior construction and components and want a few newer features (though access to streaming movie services is still missing) with two BD-Live compatible players on the way in August. Both support AVCHD, DivX, Dolby TrueHD and DTS-HD bitstreaming and more, with the BD7004 adding 7.1 analog outs, internal TrueHD and DTS-HD MA decoding, an Anchor Bay Reference Series video processor and additional reinforcement against vibrations. Look for the BD5004 (pictured above) for $549 and the BD7004 at $799. In the interests of matching equipment, announced along with the BD7004 in Japan is the 7.1 channel NR1501 amplifier due this month, supporting the latest HD audio formats in a 105mm x 367mm deep resin and fiber reinforced design for ¥60,000 ($635), check for additional pictures after the break.

In its apparent quest to build up a product cutsheet on par with Gefen's, Atlona has added the audio-splitting AT-HD570 to its lineup. This gadget should be music (ahem) to those who want to hold on to their older receivers/processors, but are itching to get the new lossless audio codecs on Blu-ray discs. Send in a HDMI signal with audio in either LPCM or bitstream format (up to Dolby TrueHD or DTS-HD MA), and this little box will break out the audio on SPDIF optical and 7.1-channel analog; those interested in the lossless codecs will want to grab those analog outputs. Meanwhile, the video signal stays on that HDMI cable, ready to go along its merry way to your video gear. The $219 price point might get you to consider picking up a Blu-ray deck with analog outputs instead, but definitely useful for cases where you're forced to deal with HDMI-less components.

Waiting for the next big 3D release to come home? Universal has slotted Coraline for July 21, with a 3D and 2D version included in the 2 disc set, along with four pairs of 3D glasses. Extra features like U-control and Digital Copy are 2D only, but with 5.1 DTS-HD MA soundtrack and D-BOX Motion Code included, it's hard to see anything this release is missing. Of course, it could be proper stereoscopic 3D instead of anaglyph, but until those 3D HDTVs gain wider adoption, we guess this will have to do.

One of our tipsters spotted Sony's latest Blu-ray player on a local Best Buy shelf sporting a $299 price tag. The BDP-S360 adds the DTS-HD MA decoding you were missing from the previous model, plus improved DVD scaling and out of the box BD-Live support. Of course one has to ask themselves if, in 2009, a player lacking the Netflix streaming or Amazon VOD features of competing hardware, or the DLNA streaming and integrated WiFi of the upcoming BDP-S560 is really worth braving these H1N1-infested streets, but we'll leave that choice up to you.

[Thanks, RyanD]

If you're building out your own HTPC rig, add the new MSI X58 Pro-E motherboard to the list of contenders for your dollars. The board packs an Intel X58 Northbridge / ICH10R Southbridge combo alongside Realtek ALC889 audio to deliver "True Blu-ray" audio. It's not terribly clear exactly how the marketing-speak plays out, but between the 24-bit, 192kHz audio specs and our cynical selves, we'd wager that this is all about sending Dolby TrueHD and DTS-HD MA downstream via LPCM rather than bitstream. All things considered, that's not a bad way to go (and not without precedent), but we'd really like bitstreaming support for HTPCs that's a little more streamlined than the current offerings; we want to see the fancy logos we paid for in our receivers light up, after all!

If you read Engadget HD, it's safe to say that you're ahead of the curve when it comes to home audio/video. You do your homework before picking out gear, and you know that the PS3 can deliver Blu-ray audio bliss courtesy lossless Dolby TrueHD and DTS-HD MA tracks. One look at all the configuration options in the PS3's XMB (Xross Media Bar) interface, however, and you might find yourself wondering how to unlock the those audio codecs. In this installment of HD 101, we'll briefly cover the reason for the confusion and then go through setting up your PS3 for lossless audio step-by-step.

Traditionally, Blu-ray decks have relied on multi-core chips to process and decode that succulent audio that tickles your eardrums, but Tensilica has a better idea. In an effort to shrink the amount of components within a BD deck and to offer up "significant cost savings and a simplified programming model," it has recently demonstrated DTS-HD Master Audio Lossless decoding on a single-core SoC. The outfit's HiFi 2 Audio DSP can handle codecs from both DTS and Dolby, and apparently it's already filtering into select players. Too bad you'll probably never know if your deck has one without rolling up your sleeves and breaking out the screwdriver.

XStreamHD didn't quite make its planned October 2008 launch, but movies, music and games beamed down via satellite in high bitrate 1080p with lossless audio is a bit more real, now that the company has actually tested its vaunted delivery system. Other than confirming its FSS (Fixed Satellite Service) capability from the AMC-16 satellite, there aren't many details available other than where to go for a demo at CES 2009, we just hope they can keep things running long enough for us to get a look (announcing a content partner or two probably wouldn't hurt either.)

Blu-ray player? Check. An AV receiver? Check. Loads of cables? Check. Knowledge of how to hook everything up for maximum impact? Uh, not so much. BigPictureBigSound has hosted up a nice how-to guide for making the most of the multi-channel audio that's just waiting to ooze out of your Blu-ray player. The writeup covers both HDMI and analog approaches, and it breaks it down in five easy-to-digest steps so that you don't get all overwhelmed. Go 'head, give it a look -- it's not that difficult, we promise.

One time Xbox 360 HD DVD player pack-in King Kong is finally making its Blu-ray debut, complete with U-Control interactive features and some additional bits we'd missed the first go round. Apparently Universal has seen fit to replace the previous edition's Dolby Digital+ 5.1 soundtrack with a 5.1 DTS-HD MA version, as well as the Extended Edition footage (on an already 3 hour+ movie?) that was missing from the HD DVD. Making the jump from HDi to BD-Live is online My Scenes sharing, just in case you still needed a reason to pay the $29.98 MSRP for this disc January 20.

Granted, we've already shown you how to actually take advantage of Dolby TrueHD and DTS-HD, but if you're looking for a quick and dirty breakdown of what each audio codec means, what it can / can't do and how to wire things up with your current setup, Missing Remote's latest guide is for you. For starters, it hones in on Blu-ray audio format support -- quite relevant given the state of the format war these days -- and it continues on by explaining how to wire things up for superior results with S/PDIF, HDMI, analog, etc. There's even a special section dedicated to HTPC playback, which ought to help you folks not using a pre-fab deck. If you've been spinning your wheels of late in the wide world of multi-channel audio, have a look at the read link and see if things don't clear up.

Universal already called its shot, with a "What The Matrix did for DVD, this could do for Blu-ray" proclamation before Wanted even hit theaters so we're not surprised by the long list of extras in store. The Blu-ray version gets four U-control exclusive features, with My Chat, My Scenes and commentary maker BD-Live extras to boot. Springing for the Collector's Edition? Expect some collectible postcards and a lenticular scene thrown in, with 1080p MPEG-4 encoded video and DTS-HD MA audio to make sure the viewing experience lives up to expectations. Even with a $135 million box office haul to its name we don't know if all the hype is deserved, but if Angelina Jolie and guns interest you, the package is due December 2, MSRP $39.98 standard, $69.98 CE.

Ooh, goodie! A full five months after Corel released its WinDVD 9 Plus Blu-ray application, the first major update pack has arrived. The unimaginatively named WinDVD 9 Plus Blu-ray Update Pack checks in at just under 50MB and size and promises to resolve the "Enable S/PDIF Out" / "HDMI output to speaker" issues while expanding the list of compatible commercial titles and enhancing compatibility for a slew of VGA chipsets within Windows Vista / XP. There's no direct mention of BD-Live support, but for those who purchased the original, why not give the update a go and report back?

[Thanks, Tyler]

That sound you just heard was millions of Browncoats exhaling, because the Firefly Blu-ray boxed set hinted at back in April is finally nearing release. All those still reading and not already frantically preordering the $89.98 MSRP set or repaying their oxygen debt have quite a bit to look forward to. Due November 11, Fox is bringing Joss Whedon's series home complete with new-for-Blu-ray commentary and cast reunion featurette to go with the 1080p video (in correct 1.78 aspect ratio) and DTS-HD MA soundtrack. So now that it has a date, what do we do? Probably not talk quite so much.