Scant hours after the SDV tuning, DRM-relaxing firmware update for Vista and Windows 7 Digital Cable Tuner users became available, Missing Remote let us know Microsoft has come through on the other half of its CEDIA promise by pushing the Digital Cable Advisor to Media Center Extras galleries everywhere. This half should enable all Windows 7 PCs to work with the CableCard tuners, sans-OEM requirement or inconvenient hacking. Sure we could ask for more from Windows 7 Media Center, but for now Netflix and these two (in less than 100 days) will have to do.

Read - MCE: Digital Cable Advisor Tool Available Now!
Read - ATI DCT Firmware update pops up on Windows Update, DRM-free MCE recordings & are a go

We look to our TV provider and companies like TiVo and Moxi to bring us DVRs, but the one thing just about every DVR has in common is a Broadcom chip makes them tick. So while the rest of the box varies by a lot, if the System on a Chip (SoC) doesn't support it, then it probably isn't there -- assuming another chip isn't added for a specific task. So you can understand why we got so excited when we saw the specs on the latest SoC, the BCM7125, announced by Broadcom at the Cable-Tec Expo. It of course supports tru2way and CableCARD, but more interestingly; MoCA 1.1, DLNA, Flash (as in video streaming), DOCSIS 3.0, and a 3D graphics engine. This means that little little guy could be the key to a multi-room DVR without running wires, that will play Hulu directly from the internet as well as stream content from PlayOn, all via a great looking user interface. So yeah, it has potential. The sad news is that there's no way to know how long we'll have to wait before a DVR is released that'll actually take advantage it.

Add Rogers to the list of cable operators that aren't happy with tru2way -- which is in addition to the CE companies and the public at large. No folks, tru2way is the new technology that many love to hate and we can't say we blame 'em, but we aren't sure what ground the big cable company to the north has to stand on, as it isn't exactly the model of openness. You see as bad as we think our entire CableCARD fiasco is stateside, our cold friends who talk funny can't even enjoy the TiVo HD, a Moxi or Windows Media Center -- so yeah, it's much worse.

Remember that big to do about the tru2way memorandum of understanding that Sony and the rest of the Consumer Electronics manufacturers signed earlier last year. You know, the one that said every cable operator in the US would be tru2way capable by July 1st 2009? Well that date has come and gone and while the providers insist it is no big deal, no HDTV manufactures seem very excited about tru2way at the moment. According to Comcast's EVP David Cohen, more than just three markets will be ready to go by the end of the year. At this point we'll believe it when we see it, because supposedly tru2way HDTVs have been available to Comcast subscribers in Chicago, Denver and Atlanta for some time, yet not even a single review or hands-on has appeared online, in fact we haven't even gotten a single tip or comment that anyone even has one of these tru2way TVs. Every provider in world could be ready but if there aren't plenty of tru2way TVs announced at CES in a few months, it's all for naught.

Ever since CEDIA Windows Media Center enthusiasts have been anxiously awaiting the announced firmware update for the ATI Digital Cable Tuner and the Advisor Utility. While the firmware will finally relax the DRM on recording made with the Digital Cable Tuner and enable support for Tuning Adapters, the Advisor Utility will make it so anyone can add a Digital Cable to Tuner to their Windows 7 PC. Although a hard release date was never announced for either of these, it was fully expected that both would be available at the same time as Windows 7. Now Microsoft has posted over at The Green Button letting us know that we can stop checking as neither will be released today. To add insult to injury no new date was given, only that it would be available as soon as possible. So yeah, big time bummer for Media Center fans.

With the main obstacles for adoption of CableCARD tuners in Home Theater PCs gone it just makes sense that even those who don't use Windows Media Center would want to get in on the fun. If only it was that simple, with CableLabs holding the keys to the kingdom, not just anyone can build software that will work with a CableCARD tuner and expect it to work. Good news for Sage TV fans, as the genius who came up with our favorite Media Center plugin (DVRMSToolBox) has now come up with a nifty work around. SageMCTuner is still in beta, but the idea is to put Media Center to work for Sage. So in other words, Media Center is still doing all the recordings etc, but Sage is calling all the shots and reaping all the benefits. If you want the full details you'll have to click through and try it yourself, go ahead, we'll be waiting for your return to hear how it worked out -- we bet it goes pretty well.

We have to admit that when we upgraded from Windows 7 RC to RTM we were a little apprehensive to use the upgrade hack, but if we had any CableCARD recordings we wanted to watch after the upgrade, then maybe we would've chosen a different route. Well it appears our fears were unfounded as the upgrade is actually pretty painless. In the linked how to, we learned how to hack the Windows 7 RTM install disc to allow an upgrade from RC, then watched as Windows 7 pretty much took care of the rest -- without losing access to DRM'd recordings. For an added twist, the author was using a DIY CableCARD machine so it was also good to see that OSFRLoader still works on the RTM build as we all wait patiently for Microsoft to release the utility to unleash Digital Cable Tuner to the world.

The Seattle Times sat down with Ceton, and the entire Hammer family that founded the company, and uncovered some pretty interesting details about the Kirkland, WA startup. Lucky for Windows Media Center fans -- when Gary and Pamela Hammer's son Jeremy graduated from college with a engineering degree, the entire family decided to start a new company, which designed the first multi-stream CableCARD tuner for HTPCs. Without going into all the details here, we did enjoy learning about the origins of the company as well as the fact that a yet to be announced dual tuner version of the quad tuner card should sell for less than $300. We've been excited about this product since CES 2009, but as we get closer and stories like this surface we can hardly contain our anticipation.

Here we are about five years after CableCARDs became available and only 443,000 of 'em have been deployed into 3rd party hardware -- you know, like a TiVo HD or a Windows Media Center Digital Cable Tuner. If you think that's a lot, think again, as that is barely 1 percent of the 41.5 million digital cable subscribers in the US. This was according to a report delivered to the FCC by the National Cable & Telecommunications Association (NCTA) and really gives credibility to the CEA's claim that the technology is ineffective at its intended purpose. As consumers we know all too well why the currently implementation of the technology is worthless to the other 99 percent of cable subscribers, which is a combination of the fact that 3rd party CableCARD host devices are not privy to all the same features of the cable company's set-top -- like VOD and PPV -- but also because the cable operators do just about everything possible to talk you out of using them. Regardless of the reasons one thing is for sure, CableCARDs have not fulfilled the requirements set by the Telecommunications Act of 1996, and the FCC needs to stop wasting time and get back to the drawing board.

If you have a ATI Digital Cable Tuner connected to your Windows Media Center then you've been waiting a long time for a firmware update. In fact, although updates were released fairly steadily during the first year of the product's life, the last update (1.17.1) was dated April 30th 2008. But this long delay has been particularly painful because this is the first update since CableLabs relaxed the DRM requirements last Summer -- it's also the very same update Microsoft has been touting since CEDIA 2008. So what took so long? We'd like to know, but one thing is for sure, CableLabs sure took its time in the approval process as the date on the firmware is May 1st 2009! Better late then never, so while you wait for the public release click through to find out what all the fuss is about.

Look, Moblin and MIDs and USB 3.0 are all well and good, but the real highlight of IDF is hiding in plain sight: it's Intel's CE 3100 Media Processor-based Tru2way DVR server, which has three digital cable tuners that can be streamed over a regular gigabit Ethernet or MoCA to any number of clients, ranging from other 3100-based set-top boxes to DLNA devices like laptops and even the PS3. It's seriously cool -- the clients all see the server's tuners as their own, so the experience is seamless, and since it all runs on the Tru2way stack, it doesn't matter what kind of client you plug in -- the three clients on the show floor were running interfaces from Intel, Comcast (Rovi), and Digeo. Of course, since it's a DVR, you can actually add more clients than tuners and have them play back recorded content while your other boxes use the tuners -- Intel was demoing XBMC on a Sony laptop connecting over DLNA and streaming a recorded program while a PS3 nearby ran a photo slideshow, all while the three cable clients streamed uncompressed HD video from the tuners. Intel says a number of cable companies are interested in deploying this stuff and that we should see things on the market in the next year -- we honestly can't wait. Check a video after the break.

It's about time someone said something and it's no surprise that it was the Consumer Electronics Association who finally did. You see CableCARDs are the solution that the cable industry came up with to comply with the Telecommunications Act of 1996, which stated that consumers should be able to bring their own equipment to the cable party. We of course know that outside of TiVo and a few other CableCARD DVRs like Media Center, no one uses it. Well actually the entire cable industry uses it because the FCC mandated that after July of 2007, that every single newly deployed digital set-top had use a CableCARD instead of the integrated security. This mandate was supposed to encourage the cable industry to support 3rd party CableCARD host devices better, which obviously didn't happen. And so the CEA is doing whatever it can and nudging the FCC with a, "this isn't working, what's next?" What is supposed to be next is tru2way, but we all know how that it is going nowhere, and fast. The CEA says enough is enough, lets bring on downloadable conditional access (DAC) which would replace the whole card thing with a simple download. Of course this alone isn't enough to solve the problem, and until the cable industry agrees to give up complete control of the infrastructure and adopts a two-way standardized protocol like DCR+, no matter what the cable industry does, this entire cycle is just going to start all over again. But hey, it's a start, maybe in another 16 years we'll actually be able to watch HDTV without a set-top-box.

Let's be clear right up front, we're not asking you how much you want to pay because we already know the answer; as little as possible. We want to know, what is the most you would pay. Now before you answer, lets put this into perspective. A dual tuner TiVo HD costs $300 at retail (plus subscription), a Moxi is $800 and the old ATI single CableCARD tuners were $300 -- so unlike the Ceton tuner, you'd have to rent four CableCARDs instead of just one. So keeping all that in mind, what is the most you'd pay for a single PCI-E card that could turn your Windows 7 PC and Xbox 360 into the best premium content HD DVR today?

The tuner company that we never seem to be able to pronounce correctly is planning on adding a digital cable tuner with CableCARD to its lineup. No word on price or availability but the initial seemly over ambitions timeframe was this year. Our friends at Geek Tonic were able to confirm the the company's plans for the new tuner, but also learned that there is little hope that the new device will make it to market before the Ceton tuner, and in fact the actual release is still undeterminable. The good news is that there will be some competition in the PC digital cable tuner market which is always a good thing, in fact at this point we wouldn't be surprised if Avermedia was the next to throw its hat into the mix.

[Via GeekTonic]

We learned all about it this new tuner first thing this morning and were very pleased to see a "technology preview" of the card in action at the Microsoft's booth. As expected, it is a single PCI-E card that uses one multi-stream CableCARD and offers the ability to record four HD channels at once. The tuner shows up as a single network adapter in Windows and still uses UPnP like the currently available ATI tuner does. The configuration and diagnostic interface included tabs for each individual tuner and apparently two Tuning Adapters -- unfortunately there wasn't a working demo of the SDV tuning in action. And in case you are wondering, we did ask about the price and as you might expect we were referred to Ceton for specific product questions. We do already have an appointment with them tomorrow, but we'd be surprised if they were ready to tell us.