Skip to Content

Make smart financial decisions with DailyFinance
AOL Tech

Just Add Power introduces Projector Connector HDMI-over-IP solution

It looks like the gang over at Just Add Power have cooked up a device that will let you manage multiple HDMI sources without the limits of traditional HDMI switches (and no, it isn't an HDMI Balun). The Projector Connector consists of an encoder unit that converts your HDMI source signal to IP packets and a networked receiver that decodes the signal at the display end. Add a managed switch and you can keep adding sources and display devices to your heart's content (up to 200 displays). Controlled by a PC over HTTP, this is definitely a product that will see more use in large organizations than it will in home theater setups. But still, what HD aficionado wouldn't love to get his hands on something this powerful and (relatively) inexpensive? The encoder (VBS-HDMI-308A) sells for $299, while the decoder (VBS-HDMI0108A) will run $250 -- you'll have to buy your own switch. Supports 1080p, HDCP, and up to 5.1 digital audio. Hit the read link to pick one up for yourself.

[Via CE Pro]

IOGEAR unveils new HDMI Control Center for well-heeled A/V fiends

Sure, for some folks a simple 4-port HDMI extender is all that's needed, but you're not playing around, are you? If "overkill" is the only way that you roll, check out IOGEAR's latest: the HDMI Control Center includes a wireless keyboard with built-in laser trackball, supports 1080p (1920 x 1200) and HDMI 1.3, is HDCP compliant, rocks Dolby TrueHD and DTS-HD Master Audio Support, and ships for the princely sum of $499.95. Definitely not for the weak-willed. PR after the break.

Atlona AT-HD530 Down-Converter, for those who walked uphill to school, both ways

Atlona AT-HD530 Down-Converter
From the "three steps forward, two steps back" category comes Atlona's AT-HD530 Down-Converter. Send in a signal on one of those newfangled HDMI or DVI connections, and through the magic of fuzz-inducing signal-smashing you'll be able to grab output as either S-Video or composite. That's right, for just $299 you can kneecap your new gear and drag it back into the 80s. Obviously this is aimed at custom installers with clients demanding that their old and new gear play together, but with S-Video falling by the wayside on many new AVRs, it might gain a few more users. The custom installers get a pass, but for everyone else we'd suggest that your need for a AT-HD530 is a sign that it's time to upgrade.

Engadget HD giveaway: win a 3x1 HDMI switch and HDMI cables!

Next Generation giveaway round 4
The recession antidote giveaways over at Engadget Classic have been a huge hit, and nothing could make us happier -- except a special set of giveaways just for HD readers, of course! We're sure AV gear is one of the first things to get trimmed from the household budget, but we want to make sure our readers aren't totally cut off. Luckily, the good folks at Next Generation Home Products sent us a raft of HD-centric goodies. This week we've reached in the gift bag and come up with two fistfuls of good, basic HDMI connectivity. We'll give away eight bundles: four will come with a 3x1 HDMI switch and a 4-m length of Next Generation's bulk Xtreme HDMI cable; the other four will consist of a 3x1 HDMI switch and a 3-m stretch of Xtreme HDMI cable. With the all the gadgets stacking up underneath your TV, you can never have enough HDMI cables or ports, so check the rules below and start commenting!

Special thanks to Next Generation Home Products for providing the gear!

The rules:
  • Leave a comment below. Any comment will do, but if you want to share your proposal for "fixing" the world economy, that'd be sweet too.
  • You may only enter this specific giveaway once.
    If you enter this giveaway more than once you'll be automatically disqualified, etc. (Yes, we have robots that thoroughly check to ensure fairness.)
  • If you enter more than once, only activate one comment. This is pretty self explanatory. Just be careful and you'll be fine.
  • Contest is open to anyone in the 50 States, 18 or older! Sorry, we don't make this rule (we hate excluding anyone), so be mad at our lawyers and contest laws if you have to be mad.
  • Winners will be chosen randomly. Four winners will each receive one (1) 3x1 HDMI switch and one (1) 4-m HDMI bulk Xtreme cable; approximate retail value is $246. Four winners will each receive one (1) 3x1 HDMI switch and one (1) 3-m HDMI Xtreme cable; approximate retail value is $290.
  • If you are chosen, you will be notified by email. Winners must respond within three days of the end of the contest. If you do not respond within that period, another winner will be chosen.
  • Entries can be submitted until Thursday, May 7th, 11:59PM ET. Good luck!
  • Full rules can be found here.

Engadget HD giveaway: win a 5x1 HDMI switch and long HDMI cables!

Next Generation Home Products giveaway - long HDMI cables
The recession antidote giveaways over at Engadget Classic have been a huge hit, and nothing could make us happier -- except a special set of giveaways just for HD readers, of course! We're sure AV gear is one of the first things to get trimmed from the household budget, but we want to make sure our readers aren't totally cut off. Luckily, the good folks at Next Generation Home Products sent us a raft of HD-centric goodies. This week, we're handing out stuff for those with gear separated by less than a stone's throw but more than an arm's length. We've got two bundles, each with a 5x1 HDMI switch with remote control and a HDMI EQ extender. To cover those long run lengths between components, one winner will get a 15-m HDMI cable, the other will get a 10-m length. Just in case you want to run that cable through your walls, we'll throw in two double HDMI wall plates in each bundle as well. Whether you've got a projector up in the ceiling or a noisy Xbox 360 in a closet, this giveaway is the one for you, so check the rules below and start commenting!

Special thanks to Next Generation Home Products for providing the gear!

The rules:
  • Leave a comment below. Any comment will do, but if you want to share your proposal for "fixing" the world economy, that'd be sweet too.
  • You may only enter this specific giveaway once.
    If you enter this giveaway more than once you'll be automatically disqualified, etc. (Yes, we have robots that thoroughly check to ensure fairness.)
  • If you enter more than once, only activate one comment. This is pretty self explanatory. Just be careful and you'll be fine.
  • Contest is open to anyone in the 50 States, 18 or older! Sorry, we don't make this rule (we hate excluding anyone), so be mad at our lawyers and contest laws if you have to be mad.
  • Winner will be chosen randomly. One winner will receive one (1) 5x1 HDMI switch, one (1) HDMI EQ extender, one (1) 1-m HDMI bulk cable, two (2) HDMI double wall plates and one (1) 15-m HDMI bulk cable; approximate retail value is $456. One winner will receive one (1) 5x1 HDMI switch, one (1) HDMI EQ extender, one (1) 1-m HDMI bulk cable, two (2) HDMI double wall plates and one (1) 10-m HDMI bulk cable; approximate retail value is $431.
  • If you are chosen, you will be notified by email. Winners must respond within three days of the end of the contest. If you do not respond within that period, another winner will be chosen.
  • Entries can be submitted until Wednesday, April 29th, 11:59PM ET. Good luck!
  • Full rules can be found here.

Atlona teams with Wisair for wireless USB to HDMI adapter


Wait a second -- isn't wireless USB, um, deceased? Regardless of what pundits and the industry at large have said (via words, actions, or otherwise), Wisair is absolutely refusing to give up the dream. To that end, the firm has teamed with peripheral mainstay Atlona in order to develop and produce a wireless USB to HDMI adapter. Much like the wired AT-HDPiX, the May-bound AT-HDAiR enables users to connect any USB-enabled computer to any HDTV or projector via VGA or HDMI. The difference? This one works sans extra cabling. The range here is 30 feet, though you can only expect footage to stream through at up to 720p (or 1,440 x 1,200). At least the price tag is just $199, which sure beats some of the obviously more capable options with WHDI chips within.

Engadget HD giveaway: win a 5x1 HDMI switch and Copperhead HDMI cables!

Next Generation Engadget HD giveaway
The recession antidote giveaways over at Engadget Classic have been a huge hit, and nothing could make us happier -- except a special set of giveaways just for HD readers, of course! We're sure AV gear is one of the first things to get trimmed from the household budget, but we want to make sure our readers aren't totally cut off. Luckily, the good folks at Next Generation Home Products sent us a raft of HD-centric goodies. There's still more good stuff in the bag, which brings us to round two of the giveaway. Up for grabs this week are four bundles that should help alleviate any HDMI shortages in your system. Each bundle has a 5x1 HDMI switch with remote control, a 1-m length of Copperhead HDMI cable and a 6-inch HDMI extension. Four lucky readers will be picked, so your odds should be a bit better on this giveaway; check the rules below and start commenting!

Special thanks to Next Generation Home Products for providing the gear!

The rules:
  • Leave a comment below. Any comment will do, but if you want to share your proposal for "fixing" the world economy, that'd be sweet too.
  • You may only enter this specific giveaway once.
    If you enter this giveaway more than once you'll be automatically disqualified, etc. (Yes, we have robots that thoroughly check to ensure fairness.)
  • If you enter more than once, only activate one comment. This is pretty self explanatory. Just be careful and you'll be fine.
  • Contest is open to anyone in the 50 States, 18 or older! Sorry, we don't make this rule (we hate excluding anyone), so be mad at our lawyers and contest laws if you have to be mad.
  • Winner will be chosen randomly. Four winners will receive one (1) 5x1 HDMI switch, one (1) 1-m length of Copperhead HDMI cable and one (1) 6-inch Copperhead HDMI extension. Approximate value of each package is $250.
  • If you are chosen, you will be notified by email. Winners must respond within three days of the end of the contest. If you do not respond within that period, another winner will be chosen.
  • Entries can be submitted until Friday, April 17th, 11:59PM ET. Good luck!
  • Full rules can be found here.

Atlona's AT-LINE-PRO3 video scaler goes to 11

Atlona Technologies AT-LINE-PRO3 scaler switcherBringing things in line with last year's AT-LINE-EX 10-input video scaler, Atlona Technologies has one-upped itself with the 11-input AT-LINE-PRO3. Really more of an update to the measly five inputs on the AT-LINE-PRO2, the new model brings the "PRO" series more in line with the "EX" one. The back of the unit is encrusted with inputs: 2 composite, 2 component, 1 VGA, 1 DVI-I, 4 HDMI and even a lonely S-Video, each of which can be scaled up to 1080p and sent to the pair of mirrored HDMI outputs. Definitely a piece of gear with a more commercial kind of appeal, but it's always better to have more inputs than you need as opposed to fewer, right? Ships this month for $699.

Gefen announces 4x2 and 2x4 Switchers for HDMI v1.3


Gefen's roll of new switchers continues today with two new ones: the 4x2 Switcher for HDMI v1.3 and the 2x4 Switcher for HDMI v1.3. The former, as the title insinuates, enables users to connect four HDMI v1.3-enabled devices to two HDTVs or projectors, while the latter is aimed at integrators wanting to display the same high-def video and audio on four HDTVs or projectors at the same time. Each one also comes bundled with HDMI cables and is fully CEC pass-through / HDCP compliant. As for pricing, you're looking at $549 for the 4x2 and $699 for the 2x4, and they'll both ship out next month.

Read - 4x2 Switcher for HDMI v1.3
Read - 2x4 Switcher for HDMI v1.3.

Gefen's 8x4 CAT-5 HDMI Matrix is probably overkill for you


Be warned -- unless you seriously need eight HDMI sources hooked up to a single matrix switch in order to activate four at a time on an array of panels, you should probably skip right over this one. If we just rung your bell, however, read on. Gefen's latest HDMI distribution box is definitely catering to the high-end / commercial market by being entirely rack-mountable and supporting up to eight HDMI inputs and four outputs. High-def signals can be transmitted over CAT5 cabling, and there's even an RS-232 port for additional control capabilities. As for distances, you can expect 1080i material to travel up to 300 feet without degradation, while 1080p content will flow 150 feet. The only problem? The $4,499 price tag. Full release is after the break.

Marmitek intros Connect410 and Connect411 HDMI switches

Can't say we've ever had the pleasure of handling a Marmitek device ourselves, but for those scouting a new HDMI switch, said company has a new duo it'd like for you to look at. The Connect410 is a higher-end HDMI switch that can handle four HDMI devices and pipe 'em one at a time to a single HDMI output. It also includes a built-in repeater and equalizer for correcting any signal loss, and the bundled remote ensures that you'll never have to leave the sofa to switch inputs. The Connect411 does everything the aforementioned 410 does, but it adds in a digital audio output for good measure. Each one can be procured right now across the pond for €89.95 ($121) / €149.95 ($201), respectively.

Gefen's latest DVI extenders take things two whole kilometers


And to think -- we were gettin' all hot and bothered over the extension of signals to 1,000 feet. Gefen's latest DVI extenders aim to take things far longer than 99.5 percent of Earthlings will ever need, as both the DVI-3500HD and DVI-2500HD (dual-link DVI) can take DVI, USB, RS-232 and analog audio up to 6,600 feet (two whole kilometers) without any dropouts or distortion. Of course, you'll need four fiber optic cables to make it all come together, not to mention $2,679 / $1,599 (respectively) to bring those capabilities home. But hey, you can pipe the big game to your pal's house without actually having to step foot in his less-than-inviting abode.

Neothings LightSpider takes HDMI signals 300 feet over fiber


Gefen has already taken the wind out of Neothings' sails somewhat with its HDMI v1.3 Fiber Extender, but if you're not quite ready to drop the coin required to take HDMI signals 1,000 feet over fiber optics, this here device may be the perfect solution. Dubbed LightSpider, this bridge can take HDMI, RS-232 and analog audio around 300 feet on a single fiber cable utilizing OWLink's Digital Light Interface technology. The company is quick to point out that the unit's integrated support for HDCP is a big win for those passing along protected material, though it won't go so far as to provide a price. Reportedly, the company will be on hand at EHX Spring to showcase it to HD junkies and home theater installers, after which we fully expect to hear more details on how to actually procure this thing.

Black Box doles out new media distribution over Ethernet device


Another day, another way to distribute your media over tried-and-true Ethernet. Black Box Corporation has just announced its very own content-over-Ethernet box, which is hailed as a video and audio over Ethernet (VAoE) media distribution system. The device can utilize CAT5, CAT5e and CAT6 cabling to transmit high-definition video and audio to one or more displays up to 300 feet away; if you're hoping to reach farther, just throw in a standard network switch. We're told that it can support resolutions as high as 1080p, and it even acts a true gigabit Ethernet switch by supporting IP cameras, NAS components and other devices through its trio of 10/100/1000Mbps ports. There's nary a mention of price, but we get the feeling it won't be affordable.

DVIGear outs new HDMI / DVI equipment at ISE


New projectors aren't the only things being unveiled at Integrated Systems Europe this week, as DVIGear is using the spotlight to launch a new set of HDMI and DVI accessories. We're talking HDMI Matrix Switchers that support resolutions as high as 1080p (as well as dual-link DVI up to 4,096 x 2,400), HDMI 1.3 distribution wares, and long-range HDMI 1.3 extenders that transmit signals over CAT5e / CAT6 / Coax. The outfit will also be showing off its Super High Resolution HDMI and DVI cables, which rely on heavy 22AWG gauge wire in order to carry your Blu-ray signals along a fatter-than-usual pipe. For more details on the whole lot, head on south to the read link.




AOL News

Other Weblogs Inc. Network blogs you might be interested in: